Soil Moisture Light pH Meter 3-in-1 Soil Tester Kit for Garden

A suitable soil environment is important for the healthy growth of plants. This means providing ideal soil conditions, adequate water, sunlight and plenty of nutrients for your plants. Soil tester helps you know your soil more clearly and care your plants better. It will help you to avoid some of the common mistakes made by gardeners such as over or under watering and planting in an area with insufficient lighting and even highlight potential issues with soil that is too alkaline or acidic.

Functions:
Measure soil MOISTURE, PH and LIGHT levels
Easy to use:
No Battery needed, Plug and read
Scientifically accurate:
keep your plants in a healthy range
How to use:
Simply insert the probes into the soil, and you’ll get your reading.
Ideal tool for indoor/outdoor plants, help your plants grow healthy and strong.

Specifications:
pH Range: 3.5-8 Ph (3.5-6.5 ACID, 7 NOR, 7-8 ALKALI)
Moisture Range: 1-10 (1-3 DRY, 4-7 NOR, 8-10 WET)
Relative Light: 0-2000 lux (0-200 LOW, 200-500LOW+, 500-1000 NOR 1000-2000 HIGH)
Size: 6 x 28 x 5cm [2.36 x 11 x 2″] Probe length: 18cm [7.1″] Copper probe diameter: 4.8mm
Alu probe diameter: 5.1mm
Distance between probes: 1.2cm
Color: Green
Package Included: 1 x 3 in 1 Soil Tester with instruction guide
Package weight: 107g

How to use
Step 1: Switch moisture/pH/light position
Step 2: Stick the probe into the soil about 2-4 inches
Step 3: Adjust the position of the probe until the pointer on the dial swing slightly
Step 4: After 10 minutes, Note moisture/pH/light level in the dial
Step 5: Remove probe from soil and wipe clean after each use

Tips:

1.If the soil is too dry, the indicator needle will not move, please fill in water before the test to ensure that the soil meter works

2. Since soil most often is in/close to a neutral state (with a pH value of 7-8), it is highly likely that you find the needle in the display window to stay still (because the default pH value is set at somewhere between 7 and 8) when you use it to test the pH value of soil. Customers sometimes are misled by this appearance and hence regard the tester as a defective unit by mistake.

Application

Friendly reminder：

1. Do not forcibly squeeze into hard soil or solid objects, this will damage the probe

2. Do not test pure water or other liquids separately, It can only be used to measure soil

3. Do not put the soil meter into the soil for a long time

4. Please clean the probe after each use so that you can get accurate data next time

5. If the soil is too dry, the indicator needle will not move, please fill in water before the test to ensure that the soil meter works

6. Since soil most often is in/close to a neutral state (with a pH value of 7-8), it is highly likely that you find the needle in the display window to stay still (because the default pH value is set at somewhere between 7 and 8) when you use it to test the pH value of soil. Customers sometimes are misled by this appearance and hence regard the tester as a defective unit by mistake.