Semi Automatic Finger Joint Shaper Cutter Machine

MXB3515T Automatic Finger Joint Shaper

Feed length:150-850mm
Shaping Thickness: 22-150mm
Width for workbench processing :450-580mm
Pressing thickness :30-100mm
Spindle diameter : 40mm
Spindle speed : 6750rpm
Total motor power : 30kw/42.75kw
Application :Finger Joint machine can be used for cutting teeth for the production of fine wood, furniture, etc. It is suitable for the reprocessing of waste engineering wood.

Product Description

Automatic Finger Joint Shaper Machine

Automatic finger joint shaper machine is mainly used for combing of medium and short wood. It is a mechanical processing equipment to improve the utilization rate of wood and the performance of wood. It is widely used in wood processing industry, especially suitable for construction company.

Hoizontal Finger Joint

Vertical Finger Joint

The Automatic Finger Joint Shaper adopts automatic control system, which reduces human intervention and has higher efficiency ,Equipped with dust-absorbing and dust proof system, free sawdust, long service life.

Automatic Finger Joint Shaper adopts an automatic system, and the accurate combing and combing wood waste little, which can save the labor cost and raw material cost for the enterprise . Automatic Finger Joint Shaper has high precision, high combing efficiency and is the preferred machine for processing square wood and box board.

Product Parameters

Technical Parameter of Finger Joint Machine

Model	MXB3515A	MXB3515B
Feed length	150-850mm	150-850mm
Shaping Thickness	20-150mm	20-150mm
Width for workbench processing	550mm	550mm
Pressing thickness	30-100mm	30-100mm
Pressing width	30-150mm	30-150mm
Spindle diameter	40mm	40mm
Spindle speed	6750rpm	6750rpm
Saw blade spindle power	1.5kw*2	4kw*2
Saw blade spindle power	1.5kw*2	/
Spindle motor power	15kw*2	11kw*2
Belt conveyor power	0.75kw*5	/
Total motor power	42.75kw	30kw

Technical Parameter of Finger Joint Press

Model	MHZ1525
Max. Joint length	6100-1900mm
Max. Joint width	150-400mm
Max. Joint thickness	50-12mm
Blade speed	2800r/min
Saw blade diameter	200mm
Saw motor power	2.2kw
Oil pump motor power	4kw
Working air pressure	0.5-0.8Mpa
Max thrust for oil pressure	3500kg
Max output	25m/min
Overall dimensions	42658301470mm

Features of full automatic finger joint shaper machine

1. Precision bearing is adopted in this machine for convenient operation.

2. Large area workbenches can effectively process and operate more wood.

3. The machine is equipped with pneumatic clamping device, which can effectively reduce the error caused by manual operation and make it safer and more efficient.

4. The machine adopts automatic feeding and stop function.

5. Automatic glue coating, the short wooden side of mortise and milling teeth, the long after glue application, the hydraulic pressure is tight, use this machine to connect the long square wood, the joint strength is greater than the strength of the wooden side itself.

6. The machine is equipped with motor overheat automatic protector and emergency stop switch to effectively protect the safety of operators.

7. Adopt imported PLC microcomputer control, simple operation, only one employee per set.

Whole Production Line

The finger joint machine is mainly used for splicing comb tenons of medium and short woods, such as the production of blockboard, transportation zygote, pillars, furniture, etc. It is to improve the utilization rate of wood, so as to longitudinally glue and join to make long-size specifications. Ideal processing equipment.

Product Line:

A: Strap conveyor → B: Finger joint shaper → C: Transition strap conveyor → D: Finger joint shaper(with Gluing) → E: Strap conveyor → F : Flip connection machine → G: Pre-press → H: Finger joint assembler → I: Saw cuuting platform