Main machine list for ZZCHRYSO Automatic Wood Pallet Block Production Line
This wood pallet block production line is especially for producing blocks with a hole or without a hole, for the purpose of waste wood recycling and making a profit. Actually, the raw materials used for this automatic wood block production line are the same as the raw material for the wooden pallet processing line, so, it’s waste recycling.
Within a fully automated wood pallet block production line, there is no need for workers directly involved in operation during the whole production process from raw material to final product. All the process of the production is completed by mechanical equipment and automated systems.
The wooden blocks are produced by high temperature and high pressure. Common and European standards both are available. We can also customize to match customers’ needs.
Main Machines of Automatic Wood Pallet Block Production Line
An automatic wood pallet block production line is a complete system designed for efficiently manufacturing wood pallet blocks. It typically consists of a series of machines and equipment that automate the process of producing the blocks. The production process of this wooden pallet production line mainly includes Wood chipping machine, wood crushing machine, drying machine, glue mixing machine, wood pallet bock machine, wood pallet block cutting machine
An automatic wood pallet block production line offers increased productivity, consistency, and cost-efficiency compared to manual production methods. It reduces labor requirements, improves block quality, and enables higher production volumes to meet market demand.
Wood chipper machine
Typically, a variety of biomass materials, including straw, rice husks, coconut fibers, logs, branches, tree roots, waste wooden furniture, waste wood boards, etc., are used as the raw materials for processing compressed wooden pallet block. These raw materials must be ground into a fine powder using a wood shredder in order to treat wooden pallets. The sawdust size needed to process wooden pallets is typically between 3 and 5 mm. The wood crusher’s crushing fineness can be modified to meet the needs of the customer.
wood crushing machine
Wood crusher machine is a machine used to process wood and turn it into wood chips or wood shavings. The wood crusher is a device for recycling waste wood. Common raw materials include waste furniture, branches in the woods, laminates, logs, etc. The sawdust making machine can also crush bamboo, forage, corn stalk, sorghum stalk, and other fibrous rod-shaped materials. So it is also the equipment that provides the raw material for sawdust briquetting machine and charcoal production line.
Sawdust Air Flow Dryer Machine
Sawdust Airflow dryer machine, also known as Flash sawdust dryer machine and pipe type sawdust dryer machine, is specially designed for the drying of wood chips, sawdust, small wood chips, and wood particles. It only needs to send wet wood chips, sawdust or granular materials into the dryer pipe, and use a screw conveyor to continuously add them to the drying pipe.
As the ideal water content of sawdust is 8%-15% for producing biomass briquettes and pellets. Usually, the moisture of the untreated wet sawdust is 30%-50%, and fresh sawdust from the sawmill can even up to about 60%. Even if these materials are air-dried enough, the water content can be reduced to 20% at the most, but they still can not meet the requirement for producing briquettes. So it is necessary to use the sawdust air flow dryer to heat and dry the wet sawdust before making sawdust briquettes.
This equipment is mainly used for the process of molding wood chip pallets. Use waste materials such as wood shavings and wood chips to produce pallets after mixing with glue. This new type of glue mixing machine solves the problem that the traditional machine can not continuously feed and mix the glue, the glue is not uniform, and the meter can not be measured when discharging.
This glue mixing machine has the advantages of uniform glue mixing, fast speed, and continuous operation. It can be widely used in molded pallet production lines. This glue mixing equipment has a simple structure and convenient operation. The sawdust pallet produced after mixing the glue is strong and environmentally friendly. At the same time, it can also be used for mixing glue of other materials, which has broad market prospects.
Wood Pallet Block Making Machine
Wood pallet block making machine can use sawdust and wood shavings as raw materials, which are abundant and cheap sources of wood waste. The machine can compress and mold the materials into solid and uniform blocks under high temperature and high pressure. The blocks can have different sizes and shapes according to the requirements of the customers.
Wood pallet block cutting machine
Wood block cutting machine is used for cutting wood strips to wood block. And the pallet block is used to make the wood pallet base, which is for the transportation or storage pallet. Besides, the final pallet block could get the E1 grade. While, the pallet block could be solid without hole in the center, and also could be hollow.
The equipment can be used for the automatic cutting of the multi – plate foot pier, the square of the wood, and the length of the cutting can be adjusted, and the 100*100mm can be realized under the same specifications. The equipment has simple structure, simple operation, high efficiency, cutting 1800-2000 per hour. Cut out the shavings foot pier block section smooth,he whole cutting process of artificial touch operation to cutting saw blade, so the use is very safe.